DIGIT-TM III Framework Contract: Winners and CV Rules

Este artigo é publicado na língua original.

European Market & Institutions

The DIGIT-TM III framework contract is the European Commission’s reference agreement for buying external IT and digital-services expertise between 2026 and 2030. It is run by the Directorate-General for Informatics (DG DIGIT), has a ceiling of about €3.97 billion excluding VAT, and is open to other participating EU institutions.

For consulting and staffing companies, the contract is moving from paperwork to practice. The handover of more than 3,000 consultants from DIGIT-TM II to DIGIT-TM III is closing, and the first true service requests and competitions start in January.

This guide to the DIGIT-TM III framework contract covers where it stands, who won it, how mini-competitions are scored, what a compliant CV must show, and what to prepare before the first request arrives. The facts come from the tender documents and the notices published on TED.

Where does the DIGIT-TM III framework contract stand today?

Phase one is ending. By December, the handover period closes, during which more than 3,000 consultants have been moved from DIGIT-TM II to DIGIT-TM III.

December is the last opportunity for all remaining requests to be sent to the companies that have the consultants. From January, true service requests and the competition between contractors start, and the process optimisation that DIGIT-TM III introduces will make a visible difference to the companies on the contract.

What is the DIGIT-TM III framework contract?

It is the multi-supplier agreement through which DG DIGIT buys IT and digital-services expertise for the Commission and other participating institutions. It replaces DIGIT-TM II and runs for at most 48 months.

The prior information notice of August 2025 gave an estimated value of €3.5 billion. The contract notice then set the ceiling at €3,971,638,879 excluding VAT, split across three lots. A ceiling is the maximum the Commission may spend under the framework.

The tender was run under Regulation (EU, Euratom) 2024/2509. The contract is a multi-supplier Time-and-Means (T&M) framework with reopening of competition, billed on daily rates.

How is the DIGIT-TM III framework contract structured?

The services cover the digital-solution lifecycle in three domains: digital solution management, definition, design, construction, transition and data management, and operations, support and exploitation. All services must be performed from within the EU.

Lot 1

Far-site (remote within the EU)

Any EU Member State, with places of delivery in Belgium, Luxembourg, Italy, Spain, Germany, the Netherlands and Ireland

€1.396 billion

Ceiling, excl. VAT

Lot 2

Near-site (Belgium)

Brussels and Geel

€2.007 billion

Ceiling, excl. VAT

Lot 3

Near-site (Luxembourg and JRC sites)

Luxembourg, Ispra, Seville, Karlsruhe, Petten, Grange

€0.569 billion

Ceiling, excl. VAT

Each lot allows at most 20 framework contractors. Assignments are distributed through mini-competitions among the contractors of the relevant lot.

Who won the DIGIT-TM III framework contract?

The Commission confirmed the award on 15 June 2026. The result notice was published on TED on 6 August 2026. Lot 1 attracted 19 tenders and has 14 winning contractors, Lot 2 attracted 16 tenders and has 13, and Lot 3 attracted 16 tenders and also has 13.

Of the 40 winning tenders, 37 are consortia and 3 are single companies. In total, 76 legal entities appear in the award notice. Every future Service Request goes to a mini-competition among the contractors of that lot, so the lists below are the pool DG DIGIT will draw from for the next four years, not a staffing decision.

Lot 1: 14 winning contractors

71 legal entities

Each row is one winning contractor. The number shows how many legal entities it groups.

7

NETCOMPANY S.A. · NTT DATA BELGIQUE · CAPGEMINI BELGIUM · SOGETI LUXEMBOURG SA · COSMOTE GLOBAL SOLUTIONS · Westpole Belgium · PricewaterhouseCoopers Tax and Advisory

3

ALTIA EUROPEAN SERVICES, B.V. · ALTIA CONSULTORES SA · SOFTSERVE POLAND SP ZOO

7

TWENTY8 · TWENTY8 Luxembourg SA · AMARIS IS&D · REPLY SpA · Wemanity Reply · TALAN LUXEMBOURG SARL · Talan Belgium

5

SWORD TECHNOLOGIES SA · ATOS BELGIUM · CEGEKA GROEP · QUENTO TECHNOLOGIES MONOPROSOPI ANONYMI ETAIREIA · ARCADIA SIT

3

EUROPEAN DYNAMICS LUXEMBOURG SA · EUROPEAN DYNAMICS ADVANCED INFORMATION TECHNOLOGY AND TELECOMMUNICATION SYSTEMS SA · SEIDOR CONSULTING SL

6

CRONOS EUROPA · FUJITSU TECHNOLOGY SOLUTIONS · FUJITSU TECHNOLOGY SOLUTIONS (LUXEMBOURG) SA · SERCO BELGIUM · SERCO ITALIA SPA · DELOITTE CONSULTING & ADVISORY BV

6

FINCONS SPA · FINCONS BE · Almaviva de Belgique SA · ATECH ADVANCED SOLUTIONS SA · NEDERLANDS CENTRUM VOOR INTERIM-MANAGEMENT BV · HALIAN SARL

4

TATA CONSULTANCY SERVICES BELGIUM · CHARLES OAKES & CO SARL · TATA Consultancy Services Luxembourg SA · Tata Consultancy Services Netherlands B.V.

7

Kyndryl Luxembourg S.à r.l. · Kyndryl Belgium BV · Kyndryl Nederland B.V. · Kyndryl España · Kyndryl Ireland · Kyndryl Italia S.p.A. · Kyndryl Deutschland GmbH

8

NETWORK RESEARCH BELGIUM SA · UNISYS BELGIUM · ENGINEERING INTERNATIONAL BELGIUM S.A. · Piksel s.r.l. · RANDSTAD DIGITAL BELGIUM NV · SOPRA STERIA BELGIUM · UNISYSTEMS LUXEMBOURG SARL · VASS EU SERVICES

6

INDRA SOLUCIONES TECNOLOGIAS DE LA INFORMACION SL · CGI BELGIUM NV · CGI LUXEMBOURG SA · EDDA INTERNATIONAL S.A. · LEONARDO BELGIUM SA · TREMEND SOFTWARE CONSULTING SRL

4

ARHS Developments Belgium N.V. · ACCENTURE SA · MALT COMMUNITY · THALERIA

4

ARICOMA SYSTEMS · DUKAT ORB S.L. · ALTEN BELGIUM · Phoenix Developments S.A.

1

BUSINESS INTEGRATION PARTNERS SPA · Single company

Lot 2: 13 winning contractors

63 legal entities

Each row is one winning contractor. The number shows how many legal entities it groups.

4

TATA CONSULTANCY SERVICES BELGIUM · CHARLES OAKES & CO SARL · TATA Consultancy Services Luxembourg SA · Tata Consultancy Services Netherlands B.V.

6

NTT DATA BELGIQUE · NETCOMPANY S.A. · CAPGEMINI BELGIUM · COSMOTE GLOBAL SOLUTIONS · PricewaterhouseCoopers Tax and Advisory · Westpole Belgium

4

CEGEKA GROEP · SWORD TECHNOLOGIES SA · ATOS BELGIUM · QUENTO TECHNOLOGIES MONOPROSOPI ANONYMI ETAIREIA

7

TWENTY8 · TWENTY8 Luxembourg SA · AMARIS IS&D · REPLY SpA · Wemanity Reply · TALAN LUXEMBOURG SARL · Talan Belgium

4

ARHS Developments Belgium N.V. · ACCENTURE SA · MALT COMMUNITY · THALERIA

6

CRONOS EUROPA · FUJITSU TECHNOLOGY SOLUTIONS · FUJITSU TECHNOLOGY SOLUTIONS (LUXEMBOURG) SA · SERCO BELGIUM · SERCO ITALIA SPA · DELOITTE CONSULTING & ADVISORY BV

Lot 3: 13 winning contractors

67 legal entities

Each row is one winning contractor. The number shows how many legal entities it groups.

6

NETCOMPANY S.A. · NTT DATA BELGIQUE · PricewaterhouseCoopers Tax and Advisory · Westpole Belgium · COSMOTE GLOBAL SOLUTIONS · SOGETI LUXEMBOURG SA

4

TATA CONSULTANCY SERVICES BELGIUM · CHARLES OAKES & CO SARL · TATA Consultancy Services Luxembourg SA · Tata Consultancy Services Netherlands B.V.

8

NETWORK RESEARCH BELGIUM SA · UNISYS BELGIUM · VASS EU SERVICES · UNISYSTEMS LUXEMBOURG SARL · SOPRA STERIA BELGIUM · RANDSTAD DIGITAL BELGIUM NV · Piksel s.r.l. · ENGINEERING INTERNATIONAL BELGIUM S.A.

6

CRONOS EUROPA · FUJITSU TECHNOLOGY SOLUTIONS · FUJITSU TECHNOLOGY SOLUTIONS (LUXEMBOURG) SA · SERCO BELGIUM · SERCO ITALIA SPA · DELOITTE CONSULTING & ADVISORY BV

7

Kyndryl Luxembourg S.à r.l. · Kyndryl Belgium BV · Kyndryl Nederland B.V. · Kyndryl España · Kyndryl Ireland · Kyndryl Italia S.p.A. · Kyndryl Deutschland GmbH

4

ARHS Developments Belgium N.V. · ACCENTURE SA · MALT COMMUNITY · THALERIA

4

ARICOMA SYSTEMS · DUKAT ORB S.L. · ALTEN BELGIUM · Phoenix Developments S.A.

7

TWENTY8 · TWENTY8 Luxembourg SA · AMARIS IS&D · REPLY SpA · Wemanity Reply · TALAN LUXEMBOURG SARL · Talan Belgium

5

SWORD TECHNOLOGIES SA · CEGEKA GROEP · EVIDEN LUXEMBOURG SA · ARCADIA SIT · QUENTO TECHNOLOGIES MONOPROSOPI ANONYMI ETAIREIA

1

Proximus Luxembourg S.A · Single company

3

EUROPEAN DYNAMICS LUXEMBOURG SA · EUROPEAN DYNAMICS ADVANCED INFORMATION TECHNOLOGY AND TELECOMMUNICATION SYSTEMS SA · SEIDOR CONSULTING SL

6

EDDA INTERNATIONAL S.A. · CGI BELGIUM NV · TREMEND SOFTWARE CONSULTING SRL · LEONARDO BELGIUM SA · INDRA SOLUCIONES TECNOLOGIAS DE LA INFORMACION SL · CGI LUXEMBOURG SA

Winning legal entities and the lots they hold

76 legal entities

✓ means the entity holds a place on that lot. 76 entities, scroll inside the table to see them all.

Awarded companyLot 1Lot 2Lot 3
ACCENTURE SA✓✓✓
AE–✓–
Almaviva de Belgique SA✓✓✓
ALTEN BELGIUM✓✓✓
ALTIA CONSULTORES SA✓––
ALTIA EUROPEAN SERVICES, B.V.✓––
AMARIS IS&D✓✓✓
ARCADIA SIT✓–✓
ARHS Developments Belgium N.V.✓✓✓
ARICOMA SYSTEMS✓✓✓
ATECH ADVANCED SOLUTIONS SA✓✓✓
ATOS BELGIUM✓✓–
BECHTLE–✓–
BUSINESS INTEGRATION PARTNERS SPA✓––
CAPGEMINI BELGIUM✓✓–
CEGEKA GROEP✓✓✓
CGI BELGIUM NV✓✓✓
CGI LUXEMBOURG SA✓✓✓
CHARLES OAKES & CO SARL✓✓✓
COSMOTE GLOBAL SOLUTIONS✓✓✓
CRONOS EUROPA✓✓✓
DELOITTE CONSULTING & ADVISORY BV✓✓✓
DUKAT ORB S.L.✓✓✓
Easi nv–✓–
EDDA INTERNATIONAL S.A.✓✓✓
ENGINEERING INTERNATIONAL BELGIUM S.A.✓✓✓
EUROPEAN DYNAMICS ADVANCED INFORMATION TECHNOLOGY AND TELECOMMUNICATION SYSTEMS SA✓✓✓
EUROPEAN DYNAMICS LUXEMBOURG SA✓✓✓
EVIDEN LUXEMBOURG SA––✓
FINCONS BE✓✓✓
FINCONS SPA✓–✓
FUJITSU TECHNOLOGY SOLUTIONS✓✓✓
FUJITSU TECHNOLOGY SOLUTIONS (LUXEMBOURG) SA✓✓✓
HALIAN SARL✓✓✓
INDRA SOLUCIONES TECNOLOGIAS DE LA INFORMACION SL✓✓✓
Kyndryl Belgium BV✓✓✓
Kyndryl Deutschland GmbH✓–✓
Kyndryl España✓–✓
Kyndryl Ireland✓–✓
Kyndryl Italia S.p.A.✓–✓
Kyndryl Luxembourg S.à r.l.✓✓✓
Kyndryl Nederland B.V.✓✓✓
LEONARDO BELGIUM SA✓✓✓
MALT COMMUNITY✓✓✓
NEDERLANDS CENTRUM VOOR INTERIM-MANAGEMENT BV✓✓✓
NETCOMPANY S.A.✓✓✓
NETWORK RESEARCH BELGIUM SA✓✓✓
NTT DATA BELGIQUE✓✓✓
Phoenix Developments S.A.✓✓✓
Piksel s.r.l.✓✓✓
PricewaterhouseCoopers Tax and Advisory✓✓✓
Proximus Luxembourg S.A––✓
QUENTO TECHNOLOGIES MONOPROSOPI ANONYMI ETAIREIA✓✓✓
RANDSTAD DIGITAL BELGIUM NV✓✓✓
REPLY SpA✓✓✓
SEIDOR CONSULTING SL✓✓✓
SERCO BELGIUM✓✓✓
SERCO ITALIA SPA✓✓✓
SOFTSERVE POLAND SP ZOO✓––
SOGETI LUXEMBOURG SA✓–✓
SOPRA STERIA BELGIUM✓✓✓
SWORD TECHNOLOGIES SA✓✓✓
Talan Belgium✓✓✓
TALAN LUXEMBOURG SARL✓✓✓
TATA CONSULTANCY SERVICES BELGIUM✓✓✓
TATA Consultancy Services Luxembourg SA✓✓✓
Tata Consultancy Services Netherlands B.V.✓✓✓
THALERIA✓✓✓
TREMEND SOFTWARE CONSULTING SRL✓✓✓
TWENTY8✓✓✓
TWENTY8 Luxembourg SA✓✓✓
UNISYS BELGIUM✓✓✓
UNISYSTEMS LUXEMBOURG SARL✓✓✓
VASS EU SERVICES✓✓✓
Wemanity Reply✓✓✓
Westpole Belgium✓✓✓

How did companies win a place on the DIGIT-TM III framework contract?

By meeting minimum capacity thresholds and quoting the lowest prices. The only award criterion was price, weighted at 100%. Tenders were ranked from the lowest total price up, and the framework went to the first 20 ranked tenders that met the minimum requirements, were not excluded and fulfilled the selection criteria. At this stage, tenderers did not submit a technical tender.

The selection criteria set the bar. Turnover is assessed for the tenderer as a whole, combining all entities involved, so groups can reach the thresholds together.

Lot 1

Above €450 million

Minimum average yearly turnover, last two financial years

Time-and-Means experience, last three years

At least 3 T&M contracts, including 1 of at least 80 full-time equivalents and 2 of at least 30, plus at least 40 contracts across the three fields of expertise

Lot 2

Above €600 million

Minimum average yearly turnover, last two financial years

Time-and-Means experience, last three years

The same as Lot 1

Lot 3

Above €200 million

Minimum average yearly turnover, last two financial years

Time-and-Means experience, last three years

At least 3 T&M contracts, with 20, 15 and 10 full-time equivalents within two hours of Luxembourg, Ispra and one of the other sites, plus at least 20 contracts across the three fields of expertise

How do DIGIT-TM III framework contract mini-competitions work?

Every new assignment is competed among all contractors of the relevant lot, who are invited at the same time. From January, this is how the contract runs day to day.

1

The customer sends a Service Request with the profile and level, the place and mode of delivery, the estimated number of working days, the tender specifications and a technical questionnaire.

2

Contractors have a reply time of at least 10 calendar days, and can ask questions until 4 calendar days before the deadline.

3

Each offer proposes one service provider and includes the technical tender (questionnaire answers and one CV) and the financial tender with the daily rate. Offers stay valid for at least 90 calendar days.

4

The customer checks the minimum requirements, scores quality, and ranks the offers with the award formula.

5

The first-ranked contractor gets the specific contract and has 10 calendar days to sign it. If it declines or does not sign, the contract goes to the next ranked contractor.

70%

Quality weight

30%

Price weight

70%

Minimum global quality threshold

10 days

Minimum reply time, in calendar days

The award formula gives quality a weight of 70% and price a weight of 30%. The price score is the lowest price divided by the offer’s price, and the quality score is the offer’s quality divided by the best quality score. An offer must also reach a minimum global quality threshold of 70% of the available points, and any threshold set for individual criteria.

The criteria are chosen by the customer for each request. They can include technical skills and expertise, assessed through the CV or the questionnaire, and use case results.

What must a DIGIT-TM III consultant CV show?

The CV must use the Commission’s CV form, match a profile described in Annex 01 of the Service Requirements and SLA, and meet the minimum qualification grid. Offers that do not meet the minimum are rejected.

Annex 01 describes 39 profiles in the three domains, from Project Manager and Solution Manager to AI/ML Engineer, Cloud Solution Architect, Cybersecurity Engineer and Service Desk Analyst. Customers can refine them or add new ones in each request. The minimum years of relevant IT experience depend on the level and on the consultant’s education:

Expertise levelMaster’s degree (EQF 7)Bachelor’s degree (EQF 6)Secondary education only
JuniorNo experience requiredAt least 2 yearsAt least 7 years
NormalAt least 5 yearsAt least 7 yearsAt least 12 years
AdvancedAt least 10 yearsAt least 12 yearsAt least 17 years
SeniorAt least 15 yearsAt least 17 yearsAt least 22 years

Four rules decide most rejections:

1

Only fully completed studies, certified by a diploma, count. A Master’s degree counts as 5 years and a Bachelor’s degree as 3, whatever the dates.

2

Work experience is counted in months, and a given month can never be counted twice, not even between studies and work.

3

Only IT experience after secondary school counts, unless the request says otherwise.

4

All profiles require at least B2 in the language required for the place of delivery, spoken and written, and a request can add certifications, specific expertise or security clearance.

The customer can ask for diplomas, contracts or employer references to prove anything in the CV. Teams converting existing profiles can read how it works in practice in our guide to DIGIT-TM II to DIGIT-TM III CV conversion, and how to keep client formats under control in client-specific CV templates without rebuilding each CV.

What AI, security and data rules apply?

AI is restricted at three points: preparing offers, presenting consultants, and the models used in service delivery.

  • Using any external assistance, including AI tools such as chatbots or equivalent, to prepare an offer is strictly prohibited, and offers prepared with such assistance may be rejected.
  • In a live presentation, any external help, including AI and meeting chatbots, is forbidden and may lead to rejection.
  • Tenderers must declare any AI system used for the tender and any general-purpose AI model used for the service, and the Commission can reject offers with gaps in this information to comply with the EU AI Act.

On security, contractors must follow Commission Decision (EU, Euratom) 2015/443 and Regulation (EU, Euratom) 2023/2841 on cybersecurity, along with the Security Requirements (Appendix 3a) and the Security Baseline and Acceptable Use Policy (Appendix 3b). Security incidents must be reported no later than 48 hours after the contractor becomes aware of them, and staff may need screening or clearance.

On data protection, the contractor processes personal data under Regulation (EU) 2018/1725. Personal data must be processed and held only within the EU and EEA, in EU or EEA data centres, with no access from outside. For a closer look at the AI rules, read AI and DIGIT-TM III: What Compliance Actually Means.

What is the timeline for the DIGIT-TM III framework contract?

8 August 2025

Prior information notice

Announcement of the upcoming tender, with an estimated value of €3.5 billion

7 November 2025

Contract notice

Open call for tenders published on TED, with the ceiling set at €3.97 billion; amended five times until January 2026

29 January 2026

Tender deadline

Electronic submission; tenders opened on 30 January 2026

15 June 2026

Award

Framework contractors selected on all three lots

6 August 2026

Result notice

Award published on TED

Until December 2026

Handover phase one

Consultants moved from DIGIT-TM II to DIGIT-TM III; December is the last window for remaining requests

From January 2027

Service requests and competition

True service requests and mini-competitions between contractors

What should companies prepare before the DIGIT-TM III framework contract goes live in January?

The companies that win mini-competitions will be the ones that can answer within the reply time with a CV that already meets the minimum grid. With only 10 calendar days as the minimum, preparation decides the result.

  • ✓Close any December requests that still involve your consultants, because this is the last opportunity.
  • ✓Check every consultant against the experience grid for the level you will offer, counting months once and keeping diplomas and references ready.
  • ✓Keep language levels, certifications and availability current, so a proposal never depends on a phone call.
  • ✓Prepare offers without AI chatbots or similar tools, and record any AI use the tender specifications require you to declare.
  • ✓Keep one source of truth for skills and experience, so the same consultant never appears with two different CVs.

The last point is where most teams lose time. Keeping profiles in one place, whatever system you use, means the effort goes into choosing the right consultant rather than rebuilding documents. If a tool touches the offer itself, check with your own compliance team how the rules on external assistance apply. We go deeper on this in AI and DIGIT-TM III: What Compliance Actually Means.

Frequently Asked Questions

What is the DIGIT-TM III framework contract?

DIGIT-TM III is the European Commission’s framework contract for external IT and digital services, run by DG DIGIT. It is a multi-supplier Time-and-Means contract with three lots, lasting at most 48 months, and it replaces DIGIT-TM II. Other EU institutions can use it.

How much is DIGIT-TM III worth?

The contract notice sets a ceiling of €3,971,638,879 excluding VAT: Lot 1 at €1.396 billion, Lot 2 at €2.007 billion and Lot 3 at €0.569 billion. A ceiling is the maximum the Commission may spend, not a commitment. The August 2025 prior information notice gave an estimate of €3.5 billion, which is why both figures appear in older coverage.

Who won DIGIT-TM III?

The Commission awarded the framework on 15 June 2026, and the result was published on TED on 6 August 2026. There are 14 winning contractors on Lot 1, 13 on Lot 2 and 13 on Lot 3. Most are consortia that include Accenture, Capgemini, CGI, Deloitte, Fujitsu, Indra, NTT Data, Reply, Sopra Steria, Tata Consultancy Services, Almaviva, Cronos Europa, Sword Technologies and VASS EU Services. The full lists are in the tables above.

How many companies bid for DIGIT-TM III?

The award notice records 19 tenders on Lot 1, 16 on Lot 2 and 16 on Lot 3, of which 2 on each lot came from SMEs. The framework allowed up to 20 contractors per lot, and the final numbers were 14, 13 and 13.

How many companies won each lot of DIGIT-TM III?

The award notice lists 76 legal entities, because most winning contractors are consortia. Of these, 71 appear on Lot 1, 63 on Lot 2 and 67 on Lot 3. The number of framework contractors is lower: 14 on Lot 1, 13 on Lot 2 and 13 on Lot 3.

Which companies bid together in consortia?

On Lot 1, examples are Netcompany with NTT Data, Capgemini and PwC; Cronos Europa with Fujitsu, Serco and Deloitte; Almaviva with Fincons, Atech, Nederlands Centrum voor Interim-Management and Halian; and VASS EU Services with Unisys, Randstad Digital, Sopra Steria, Engineering International and others. Composition can change between lots: Eviden Luxembourg joins the Sword Technologies group on Lot 3 only.

Which companies won all three lots?

A total of 58 legal entities appear on Lot 1, Lot 2 and Lot 3. They include Accenture, Almaviva de Belgique, CGI Belgium, Cronos Europa, Deloitte Consulting & Advisory, Fujitsu Technology Solutions, NTT Data Belgique, Sword Technologies, Tata Consultancy Services Belgium and VASS EU Services.

Which companies won only one lot?

Four entities appear on Lot 1 only: Altia Consultores SA, Altia European Services B.V., Business Integration Partners SpA and SoftServe Poland. Three appear on Lot 2 only: AE, Bechtle and Easi nv. Two appear on Lot 3 only: Eviden Luxembourg SA and Proximus Luxembourg SA.

Did consulting, staffing and talent companies win DIGIT-TM III?

Yes, alongside the large IT service providers. The list includes consulting and professional-services firms such as Deloitte and PricewaterhouseCoopers Tax and Advisory, and names from the staffing and talent market such as Randstad Digital Belgium, Malt Community and Nederlands Centrum voor Interim-Management BV.

How were the DIGIT-TM III winners selected?

Tenderers first had to meet the selection criteria: an average yearly turnover above €450 million for Lot 1, €600 million for Lot 2 and €200 million for Lot 3, plus proven Time-and-Means experience. They were then ranked on price alone, and the framework went to the first 20 ranked tenders that met the minimum requirements.

Does winning a lot guarantee work under DIGIT-TM III?

No. Signing the framework does not oblige the Commission to conclude any specific contract. A place on the framework only allows a contractor to take part in the mini-competitions of its lot, and the specific contract goes to the offer with the best price-quality score.

Are the winning contractors competing against each other?

Yes. Contractors on the same lot are invited at the same time to each Service Request and submit competing offers, each with one consultant. Companies in the same consortium act together as one contractor.

When do the first real service requests start?

True service requests and the competition between contractors start in January. Before that, the handover phase closes in December, after more than 3,000 consultants moved from DIGIT-TM II to DIGIT-TM III. December is the last opportunity to send the remaining requests to the companies that have the consultants.

How are mini-competitions scored under DIGIT-TM III?

The score is 70% quality and 30% price. The price score is the lowest price divided by the offer’s price, and the quality score is the offer’s quality divided by the best quality score. Offers below a minimum global quality threshold of 70% of the available points are rejected, and the first-ranked contractor gets the specific contract. The reply time is at least 10 calendar days.

What CV requirements apply to DIGIT-TM III consultants?

The CV must use the Commission’s CV form (Annex 03 of the Service Requirements and SLA) and match a profile described in Annex 01. Minimum experience depends on level and education, from none for a junior with a Master’s degree to 22 years for a senior with secondary education only. Work is counted in months without double counting, and every consultant needs at least B2 in the language required for the place of delivery.

Can contractors use AI to prepare DIGIT-TM III offers?

No. The Service Requirements state that using external assistance, including AI tools such as chatbots or equivalent, to prepare an offer is strictly prohibited, and offers prepared with such assistance may be rejected. Chatbots and AI are also forbidden during the live presentation of a consultant. Tenderers must additionally declare any AI system used for the tender and any general-purpose AI model used for the service.

What happens if a contractor performs poorly?

Breaching more than three Global KPIs in a semester, or the same one twice in two consecutive semesters, can lead to a Performance Improvement Plan. If this repeats in two consecutive semesters, the contractor can be suspended from mini-competitions for at least three months. Breaches of specific KPIs can bring liquidated damages.

How fast does the Commission pay under DIGIT-TM III?

The Commission approves documents and pays within 30 days of receiving the invoice, although it can suspend the payment time limit in the cases set out in the contract. Contractors must keep original documents, because audits can take place up to five years after the balance of the last specific contract is paid.

Sources

Final Thought

The DIGIT-TM III framework contract is entering the phase where it is judged on execution. The handover gave companies a head start on paper, and from January the winners will be decided one service request at a time, in days, on the strength of the CV in front of the evaluator.

If your team is preparing consultants for the first DIGIT-TM III service requests in January, book a demo with Marco Pincho and see how your profiles are kept in one place and ready for the Commission’s CV form.

Marco Pincho

Sobre o autor

Marco Pincho

Founder and CEOLinkedIn

Marco has more than 20 years of experience in the consulting industry, focusing on process automation, data management, and operational efficiency. In 2018, he founded Sprint CV after identifying the challenges consulting companies face in managing employee skills and CVs, and responding to tenders.

Today, Sprint CV helps more than 70 consulting companies across Europe, including VASS Group, Fujitsu, Almaviva, Cronos Europa, and Sword Group, automate and optimise CV management and respond faster to business opportunities.