DIMOS VIII: What the €700M EU Tender Means for Your CVs

Cet article est publié dans sa langue d’origine.

CV Management & TemplatesEuropean Market & Institutions

The DIMOS VII tender that bid teams were preparing for was cancelled. The European Commission discontinued it before issuing a call for tenders and replaced it with the DIMOS VIII tender (EC-BUDG/2026/OP/0014), a live Open Procedure published on 24 September 2026. The framework is still worth €700 million, and tenders are due on 16 November 2026 at 14:00:59 CET.

That leaves bidding consortia a narrow window to get every part of the offer in order, starting with the consultant CVs that sit behind the staffing criterion. This post covers how DIMOS VIII replaced DIMOS VII, how the budget splits across two lots, how work is assigned, and where CV readiness fits into the technical score.

TL;DR
  • The DIMOS VIII tender (EC-BUDG/2026/OP/0014) is DG BUDG’s €700M framework contract for EU financial IT systems. It replaces DIMOS VII, which was cancelled before its call for tenders, and tenders are due on 16 November 2026 at 14:00:59 CET.
  • The budget splits into Lot 1 (SAP-based systems, €270M) and Lot 2 (financial interoperable systems, €430M), each running 48 months.
  • Up to four contractors are awarded per lot, with minimum average annual turnover of €70M for Lot 1 and €110M for Lot 2. A tenderer can submit for and win at most two lots.
  • 20 of the 100 technical points, with a floor of 12, go to the quality of project implementation time and staff members’ involvement. The overall pass mark is 65, with 60% required on each criterion.
  • Foreign Subsidies Regulation compliance is mandatory on Form FS-PP: a notification for contributions of €4M or more from a single third country in the past three years, a declaration for everyone else.
  • Time and Means and Quoted Time and Means requests cascade from Rank 1 down, while Fixed Price requests reopen competition among the awarded contractors.
  • Technical capacity evidence covers project references from the last five years and signed expert CVs on predefined templates, with declarations of honour and freelancer consent letters.
  • 38 participating EU entities will draw on the framework, from the European Parliament to eu-LISA and Europol.

What Is DIMOS VIII, and Why Is the Clock Already Running?

DIMOS stands for Development, Implementation, Maintenance and Operation of Financial IT Systems. It is the European Commission’s flagship framework contract for the software running the EU’s financial infrastructure, from executing the Multi-annual Financial Framework to auditing NextGenerationEU funds. The Directorate-General for Budget, DG BUDG, manages it as Central Purchasing Body on behalf of a long list of EU institutions and agencies.

DIMOS VII is the seventh generation of that contract, procedure identifier EC-BUDG/2026/OP/0006-PIN. The Prior Information Notice went out on 30 June 2026, and the full Contract Notice, with specifications and submission guidelines, followed in early September, close to the original 25 August target. Lot 1 submissions are due 26 October 2026, which puts the deadline inside a six-week window for most bid teams reading this.

The ceiling value sits at €700,000,000, matching DIMOS VI almost exactly. What changed is everything underneath that number: how the budget is split, who can compete for which part of it, and how much of the technical score now depends on the people a company puts forward, not only the solution it proposes.

What exactly is the DIMOS VIII tender?

DG BUDG’s €700 million framework contract for EU financial IT systems, run as an Open Procedure with two lots of 48 months each and published on 24 September 2026.

It replaces the discontinued DIMOS VII planning notice and follows DIMOS VI as the vehicle 38 EU entities use to procure SAP-based and custom financial software development. It is governed by Regulation (EU, Euratom) 2024/2509, the EU Financial Regulation, and runs in line with the World Trade Organization Government Procurement Agreement.

DIMOS VI vs DIMOS VIII: What Actually Changed

DIMOS VI, registered as procedure BUDG/2022/OP/0010 and often called DEMOS 6 in planning documents, was published on 3 October 2022 (TED 2022/S 191-539594). It set the first €700M ceiling for the Commission’s ERP and accounting systems, with a focus on SAP technologies.

The DIMOS VIII tender formalises two operational lots, makes Foreign Subsidies Regulation compliance mandatory and applies an updated central purchasing model serving 38 external participating buyer entities. DIMOS VII sits in the middle of the timeline only as a discontinued planning notice.

FeatureDIMOS VIDIMOS VII (discontinued)DIMOS VIII
Procedure IDBUDG/2022/OP/0010EC-BUDG/2026/OP/0006-PINEC-BUDG/2026/OP/0014
Legal statusClosed Competition Framework (Contract Notice published October 2022)Prior Information Notice, planning vehicle, discontinuedLive Open Competition Notice (Contract Notice published September 2026)
Scope focusERP, accounting and financial IT systems, with a focus on SAP technologiesPreliminary profiling across SAP systems (PAR-0001) and interoperable systems (PAR-0002)Full lifecycle across Lot 1 (SAP) and Lot 2 (interoperable)
Total ceiling€700,000,000€700,000,000 (estimated)€700,000,000 (confirmed total ceiling)
Foreign subsidies checkNot applicable, pre-dated FSR implementationApplicable (Regulation 2022/2560)Mandatory, Form FS-PP required (Regulation (EU) 2022/2560)

For a company that already delivered under DIMOS VI, the practical question is which lot fits the work it does. Sprint CV’s own coverage of the DIMOS VI framework contract walks through how that earlier framework played out for consortia and cascade rankings.

How the €700M DIMOS VIII Tender Splits Across Two Lots

Lot 1 (EC-BUDG/2026/OP/0014-LOT-1, PAR-0001) covers SAP-based technology systems, centred on SAP HANA, SAP S/4HANA and SUMMA, the Commission’s flagship financial management platform built on S/4HANA and SAP Fiori. It carries €270,000,000, 38.6 percent of the total, and requires a minimum average annual turnover of €70,000,000 across the last two closed financial years.

Lot 2 (EC-BUDG/2026/OP/0014-LOT-2, PAR-0002) covers financial interoperable systems: non-SAP and custom financial IT environments, custom web applications, reporting and analytics platforms, workflow engines, API management in service-oriented architectures, middleware and data integration services. It carries €430,000,000, 61.4 percent of the total, and the turnover threshold rises to €110,000,000 per year.

Both lots run 48 months and are mixed multiple framework contracts awarded to a maximum of four contractors. The Commission split the budget so that enterprise-grade SAP ERP and agile, interoperable custom software engineering each receive targeted technical support, and Lot 2 is the larger allocation.

Can a company bid for only one lot of the DIMOS VIII tender?

Yes. A tenderer may submit for a maximum of two lots, which means Lot 1, Lot 2 or both, and can be awarded at most two.

Each lot has its own turnover threshold, €70,000,000 for Lot 1 and €110,000,000 for Lot 2. DG BUDG set the caps to preserve long-term competition and prevent single-supplier dependence across critical systems.

Those thresholds are a significant barrier for individual mid-tier IT service providers, which is why consortia are common. Turnover is assessed for the tenderer as a whole, and for a joint bid the revenues of all consortium members and capacity-providing entities are added together. A company can also rely on the capacity of a parent or partner through a commitment letter under Annex AN-05-02.

How Work Gets Assigned Once You Are In

Specific contracts follow four execution models: Time and Means, Quoted Time and Means, Fixed Price and Proximity Time and Means. Time and Means and Quoted Time and Means requests move through a cascading mechanism. Contractors are ranked from first to fourth on their initial tender score, the request goes to Rank 1 first, and it passes to Rank 2, then 3, then 4 only if the contractor above cannot meet availability or technical requirements within the deadline.

Fixed Price requests work differently. All four awarded contractors on the lot are invited at the same time to submit competitive technical and financial proposals for each project request, and those contractors face fixed deliverable schedules and financial penalties for delay.

Time and Means and Quoted Time and Means contracts rely directly on the daily rates in the framework tender, so those rates decide how well a contractor ranks in the cascade. Each lot also carries an option clause: services that repeat similar IT services can go to the initial framework contractor, up to 50% of the initial contract value, through a negotiated procedure without prior publication of a contract notice.

Delivery is far-site, from contractor or subcontractor premises anywhere in the EU, or near-site, from facilities within two hours of travel from the customer’s premises in the same Member State or an adjacent one. On-site presence at customer offices can also be requested on a regular or ad hoc basis, across hubs in 19 Member States from Brussels and Luxembourg to Lisbon and Ljubljana.

A company’s position on the cascade, and its ability to staff near-site or on-site work quickly, come back to the same resource: how fast it can put a verified, correctly formatted profile in front of a customer once a request lands.

Why CV Quality Carries Weight in the DIMOS VIII Tender Score

Technical proposals are scored out of 100 points, with an overall minimum pass mark of 65 and a minimum 60 percent pass mark on each criterion. Miss the threshold on any one of the three, and the rest of the score does not matter.

Technical award criterionWeightingMax pointsMin pass mark
Quality of the technical solution proposal70%7042 (60%)
Quality of project implementation time and staff members’ involvement20%2012 (60%)
Assurance of feasibility of delivery (communication, reporting, organisation)10%106 (60%)
Total evaluation100%10065 (65%)

The second criterion is the one bid teams tend to underweight in their own preparation. Twenty points, with a mandatory floor of twelve, are awarded for the quality of project implementation time and staff members’ involvement, and that is a different question from the quality of the technical architecture.

The technical capacity evidence shows what sits behind staffing. Proposals must present complete team structures, defined profile roles, workload allocations and signed CVs on standard predefined templates. Each expert profile needs a signed declaration of honour, code of conduct compliance and a freelancer consent letter, and the contracting authority can audit stated qualifications through original diplomas, employment contracts, employer attestations and technical interviews.

How much of the DIMOS VIII technical score depends on staffing?

20 of the 100 points, with a minimum pass mark of 12, go to the quality of project implementation time and staff members’ involvement.

That criterion sits alongside the 70-point technical solution score and the 10-point delivery feasibility score, and all three must clear their own 60 percent floor. A tender that misses any individual threshold or the overall 65-point cutoff is eliminated before financial evaluation and contract award ranking.

A consortium that scores well on the solution but submits inconsistent, outdated or poorly formatted CVs hands the evaluators a weaker staffing section to score. Criterion 1 still carries 70 percent of the qualitative score, so drafting effort and page space should follow the same split, with exactly 70 percent going to technical architecture, SUMMA integration patterns and lifecycle methodologies.

One detail catches teams reading the raw TED eForms XML of Contract Notice 00659176-2026. Field 5.1.10 Award Criteria shows Type: Price and Weight: 100, which is a default reporting convention of the eForms structure for price-competitiveness framework rankings. The procurement specifications apply the 70/20/10 quality matrix to decide technical compliance before financial ranking.

The Compliance Layer: Foreign Subsidies Regulation

DIMOS VIII integrates a requirement that did not exist under DIMOS VI: mandatory compliance with the Foreign Subsidies Regulation, Regulation (EU) 2022/2560, in public procurement. Tendering entities that receive direct or indirect financial contributions from non-EU third countries make specific disclosures on the official Form FS-PP.

If an operator, including consortium partners, key subcontractors and parent entities, received foreign financial contributions of at least €4,000,000 per third country in the three years before submission, it lodges a formal notification under Article 28(1). Below that threshold, or with no foreign contributions at all, it submits a formal declaration under Article 29(1), confirming non-notifiable status and listing every non-notifiable contribution received.

Do we need to file an FSR notification for the DIMOS VIII tender?

Only if the company, a consortium partner, a key subcontractor or a parent entity received €4 million or more from a single non-EU country in the last three years.

Below that threshold, or with no foreign contributions at all, a formal declaration confirming non-notifiable status is required instead. Both go on Form FS-PP, so each entity in the bid needs to be checked individually.

What to Do Before the DIMOS VIII Tender Closes

The preparation work needs to run in parallel, not in sequence. Questions to DG BUDG go through the EU Funding and Tenders Portal until 6 November 2026, and the tender itself closes on 16 November 2026 at 14:00:59 CET.

MilestoneDate and timeReference
Contract notice published24 September 2026TED 00659176-2026 / OJ S 185/2026
Questions (clarification requests)6 November 2026 at 23:59:59 CETEU Funding & Tenders Portal
Deadline for receipt of tenders16 November 2026 at 14:00:59 CETMandatory electronic eSubmission
Tender opening17 November 2026 at 10:00:00 CETOpening session by Commission authorities
Tender validity6 monthsComputed from the receipt deadline
  • ✓Confirm which lot fits the company’s core competencies, SAP-based systems for Lot 1 or custom and interoperable systems for Lot 2
  • ✓Form or confirm consortium agreements if turnover alone does not clear €70M or €110M, and collect Annex AN-05-02 commitment letters from entities whose capacity the tenderer relies on
  • ✓Complete the turnover statement on Annex AN-15-00 with certified P&L statements and official bank statements for the last two closed financial years
  • ✓Audit every consortium entity’s foreign financial contributions against the €4M threshold and prepare Form FS-PP as a notification or a declaration
  • ✓Gather project references from the last five years that show direct experience with S/4HANA migrations, complex data migration or custom SOA web integration
  • ✓Assemble signed expert CVs on the predefined templates, with signed declarations of honour, code of conduct compliance and freelancer consent letters
  • ✓Set the daily profile rate matrix in Financial Tender Annex AN-06-00, since Time and Means contracts rely on those rates
  • ✓Package the tender as three files (FINANCIAL TENDER, TECHNICAL TENDER in PDF, OTHER DOCUMENTS) and submit before 16 November 2026 at 14:00:59 CET

Tenders are submitted exclusively through the EU eSubmission tool in the EU Funding and Tenders Portal (eSubmission link for this procedure), in any of the 24 official EU languages. The FINANCIAL TENDER carries the financial schedules, signed electronically or with a scanned blue-ink signature by an authorised legal representative. The TECHNICAL TENDER carries the qualitative response in PDF, and OTHER DOCUMENTS carries the administrative annexes, declarations on honour, FSR forms and financial statements. Email communications or supplemental portal uploads are limited to 25 MB per transmission.

Where CV Readiness Fits Into a DIMOS VIII Bid

The staffing criterion is where a consulting company’s internal CV process either helps or gets in the way. Verified, correctly formatted profiles across the whole team need to exist before a request lands, not get assembled from scratch once a deadline is close.

Sprint CV already supports the DIMOS VI CV template, generating a compliant CV from a consultant’s existing profile in well under a minute. The same AI CV Parser behind that conversion is being configured for the DIMOS VIII format as well, mapping the summary, project description, and roles and responsibilities straight into the required fields without a manual rebuild.

For a company managing dozens or hundreds of consultant profiles across an active DIMOS bid, that difference shows up directly in staffing: CVs that are ready before the request comes in, rather than chased down candidate by candidate once it does. Companies weighing what that readiness takes can look at how CV management for consulting companies or the broader Enterprise CV Manager fits an active EU framework contract bid, or how the same profile data feeds Enterprise API integrations for companies running their own tender pipeline.

Winning a contract like this comes down to that same point at a larger scale. A centralised enterprise CV manager holding every consultant’s data in one place is what lets a company respond to a tender request quickly and accurately, and predefined CV templates tied to specific fields are exactly the kind of format where scattered CVs cost real time. Companies with that centralised database already in place go into a request like this able to respond in hours, not days.

Frequently Asked Questions

What is the DIMOS VIII tender?

It is DG BUDG’s €700,000,000 framework contract for EU financial IT systems (EC-BUDG/2026/OP/0014), run as an Open Procedure with two lots and published on 24 September 2026. It serves 38 participating EU entities.

What happened to DIMOS VII?

DIMOS VII was a Prior Information Notice published on 30 June 2026 with an estimated €700,000,000 ceiling. Operational adjustments and contractual restructuring led the Commission to discontinue it before any call for tenders, and DIMOS VIII replaced it as a live competition.

When is the deadline to submit a DIMOS VIII tender?

Tenders must be received by 16 November 2026 at 14:00:59 CET through the EU eSubmission tool. Questions close earlier, on 6 November 2026 at 23:59:59 CET, and tenders are opened on 17 November 2026 at 10:00:00 CET.

What changed between DIMOS VI and DIMOS VIII?

DIMOS VI (BUDG/2022/OP/0010) was published in October 2022 with a €700M ceiling and a focus on SAP technologies. DIMOS VIII keeps the ceiling, formalises two lots with up to four contractors each, and makes Foreign Subsidies Regulation compliance mandatory.

How much of the technical score depends on staffing?

Criterion 2, the quality of project implementation time and staff members’ involvement, carries 20 of the 100 points, with a minimum pass mark of 12. The technical capacity evidence also asks for signed expert CVs on predefined templates.

Do all tenderers need to disclose foreign financial contributions?

Yes, on Form FS-PP. Contributions of €4,000,000 or more per third country in the three years before submission require a notification under Article 28(1). Below that, or with none, a declaration under Article 29(1) is required.

Final Thought

DIMOS VIII keeps the €700M opportunity that DIMOS VI set and that DIMOS VII never carried to a call for tenders. The two-lot structure, the €70M and €110M turnover thresholds, mandatory disclosure on Form FS-PP and a 65-point technical pass mark define what a credible bid looks like.

With 20 points on staffing, the CV work a bid team does before 16 November 2026 carries as much weight as parts of the technical proposal itself. Companies that treat CV readiness as part of the technical score, and not as paperwork to finish once the solution is written, go into the deadline with a real shot at clearing the 60 percent floor on that criterion.

With the DIMOS VIII tender due on 16 November 2026, there is a narrow window to get consultant CVs verified, formatted and ready for the 20-point staffing criterion before the deadline.

Book a demo with Marco Pincho

Marco Pincho

À propos de l’auteur

Marco Pincho

Founder and CEOLinkedIn

Marco has more than 20 years of experience in the consulting industry, focusing on process automation, data management, and operational efficiency. In 2018, he founded Sprint CV after identifying the challenges consulting companies face in managing employee skills and CVs, and responding to tenders.

Today, Sprint CV helps more than 70 consulting companies across Europe, including VASS Group, Fujitsu, Almaviva, Cronos Europa, and Sword Group, automate and optimise CV management and respond faster to business opportunities.